Electra V6-231 3.8L VIN C SFI (1988)
![background image](/buick/electra/v6-231_3.8l_vin_c_sfi/Page-1951004.png)
- Install electrical connector to fluid level sensor switch.
Proportioner Valve Assembly
- Lubricate new 0-rings and external proportioner valve threads with clean brake fluid.
- Install new 0-rings on proportioner valve assemblies.
- Install proportioners into master cylinder body and torque to 33 Nm (24 ft.-lbs.).
8. Fit diaphragm into reservoir cover, then install cover onto reservoir.
9. Install master cylinder in vehicle.