Electra V6-231 3.8L VIN C SFI (1988)
Blower Motor: Initial Inspection and Diagnostic Overview
Manual Climate Controls
^
Try the following checks before doing the System Diagnosis.
1. Check Fuse 7 by visual inspection.
2. Check that ground G103 is clean and tight.
3. Check that Blower Motor connector and Blower Relay are mated correctly and firmly seated.
^
Refer to the A/C System / System Diagnosis / Procedures / Functional Test for a guide to normal operation and diagnostic references of entire A/C
System. See: Testing and Inspection
^
Go to System Diagnosis to isolate blower control conditions. See: System Diagnosis