Electra V6-231 3.8L VIN C SFI (1988)
Windshield: All Technical Service Bulletins
Windows - Updated Procedure for Water Deflector
Bulletin:
88-10-17
Date:
Mar., '88
Ref. No.:
88-101-10
Corp. Ref. No.: 801505
SUBJECT:
REVISION TO SERVICE MANUAL REPLACEMENT PROCEDURE OF MOLDING COMBINATION WINDSHIELD AND ROOF
SCALP (DRIP)
MODELS AFFECTED: 1986-88 LESABRE COUPES
FIGURE 1
Replacement of the above screw retained molding per the 1988 Body Service Manual (See Figure 1), required removal of the stationary quarter window
module as a tape and break operation (See Section 2-10 of the 1988 Body Service Manual).
It has been determined this module can be cut out and reinstalled in the same manner as the extended method used for windshields and back glasses.