Electra V8-350 5.7L DSL (1983)
Fig. 16 Fuel return line
Fig. 17 Injection nozzle installation
8.
Remove fuel lines to fuel filter, then the fuel filter, Figs. 14 and 15.
9.
Disconnect fuel line at fuel pump and remove fuel line. If equipped with A/C, remove rear compressor brace.
10.
Disconnect fuel return line from injection pump, Figs. 15 and 16.
11.
Slide clamp from fuel return lines at injector nozzles and remove fuel return lines from each bank.
12.
Disconnect injection pump lines at injector nozzles, Fig. 17. It is necessary to use two wrenches.
13.
Remove nuts retaining injection pump with tool No. J-26987.
14.
Remove injection pump and cap all lines and fittings.