Electra Park Avenue V6-231 3.8L VIN C SFI (1989)
FIGURE 2 - FRONT MOUNTED ANTENNA
B.
Front mounted (Figure 2). Remove mounting nut with tool provided.
FIGURE 3 - REAR MOUNTED ANTENNA
C.
Rear mounted (Figure 3). Remove insulator stop using a 14 mm deep well, 12 point socket.
4.
Remove finial using a wrench or suitable tool on flats of finial. Keep the 100 rod assembly from turning by gripping rod with pliers padded with
cloth or rubber to prevent damage to rod surface. Do not bend 100 rod.
5.
Using long nose pliers or fingers, remove the tube assemblies from the antenna, sliding them over the 100 rod assembly.
NOTE:
Antennas may have two or three tube assemblies.
