Enclave AWD V6-3.6L (2009)
Important
Before proceeding with the update, advise the customer that the Address Book, Previous Destination data, and Preset data may be removed during the
SW update. The user will have to input this data when the update is complete.
Important
-
Do not eject the disc during the update.
-
Do not turn the ignition off or remove power to the radio during the update.
-
Do not leave the disc in the radio after the update.
-
Do not give the disc to the customer.
-
The software update disc may be used to update more than one vehicle.
Condition 1
For these conditions, follow this procedure:
Technicians are to update the navigation radio software using a software update disc, P/N 20884820. The software update disc is to be obtained from the
GM Navigation Disc Center, using the GM Navigation Disc Center Contact Information below.
Navigation Radio Software Update for Cadillac Escalade Models
1. Start the engine with the gear shift in PARK, and wait until the audio or navigation screen is displayed.
2. Proceed to the FM audio screen and confirm the current navigation software version by pressing the CONFIG and SEEK buttons (2)
simultaneously as indicated in the above illustration. If the screen switches, select FM to display the software version. Performing this operation
may take a couple of attempts for the radio to detect the simultaneous button press. The navigation software version will be the first four characters
(1), reading from the left of the display, that is located in the middle of the screen.
Record all information shown for later reference.
3. If the navigation software version is 101F or higher (e.g.101H), the radio has the latest navigation software available and no update is necessary.
However, if the string of letters across the screen is not alphanumeric, this indicates an internal communication problem with the radio. For this
condition, refer to SI. For all other navigation software versions proceed to step 4 to continue the software update.
