Enclave AWD V6-3.6L (2009)
9. Install the air conditioning lines (4, 5) and the nut (6) to the auxiliary HVAC module.
Tighten the nut to 16 Nm (12 lb ft).
10. Install the heater lines (2, 3) to the auxiliary HVAC module at the underside of vehicle.
11. Install the right rear wheelhouse liner panel. Refer to Rear Wheelhouse Panel Liner Replacement (See: Body and Frame/Fender/Rear
Fender/Rear Fender Liner/Service and Repair).
12. Lower the vehicle.
13. Fill the engine coolant. Refer to Cooling System Draining and Filling (Static Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service
and Repair)Cooling System Draining and Filling (Vac N Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair).
14. Recharge the refrigerant to the system. Refer to Refrigerant Recovery and Recharging (See: Heating and Air Conditioning/Service and
Repair/Procedures/Refrigerant Recovery and Recharging).
15. Leak test the fittings of the component using the J 39400-A .