LaCrosse V6-3.6L (2007)
5. Install the wheel cylinder brake pipes (1) on the BPMV (2).
Tighten all of the brake pipe fittings to 15 N.m (11 lb ft).
6. Connect the EBCM harness connector. Push in lock tab (1).
7. Fill and bleed the brake hydraulic system.
8. Turn the ignition switch to the RUN position, engine off.
9. Perform the Diagnostic Trouble Code (DTC) List - Vehicle. See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Descriptions