LaCrosse V6-3.6L (2007)
7. Depress the locking tab (2) on the windshield wiper and washer switch (1) and remove the switch from the steering column.
Installation Procedure
1. Install the windshield wiper and washer switch (1) to the steering column.
2. Connect the electrical connectors (1,3) on the windshield wiper and washer switch.
3. Install the wire harness (2) to the wire harness shield (1) on the lower steering column.
4. Route and connect the electrical connector from the windshield wiper and washer switch.
5. Install the wiring harness tie straps (1,2).
6. Install the steering column trim covers.
7. Enable the SIR system. refer to SIR Disabling and Enabling. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair
