buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Garnish Molding Replacement - Lower Pillar|Page 22077 > < Garnish Molding Replacement - Lower Pillar|Page 22075
Page 1
background image

Trim Panel: Procedures
Trim Panel Replacement - Rear Quarter Lower

TRIM PANEL REPLACEMENT - REAR QUARTER LOWER

TOOLS REQUIRED

J 38778 Door Trim Pad and Garnish Clip Remover

REMOVAL PROCEDURE

1. Loosen the rear carpet retainer. Refer to Trim Panel Replacement - Lower Center Pillar.
2. Remove the rear seat cushion.
3. Remove the rear seat back.

4. Use J 38778 in order to disengage the push-in retainers. Remove the quarter lower trim.

INSTALLATION PROCEDURE

1. Engage the push-in retainers in order to install the quarter lower trim.
2. Install the rear seat back.
3. Install the rear seat cushion.
4. Return the rear carpet retainer to its installed position. Refer to Trim Panel Replacement - Lower Center Pillar.

Garnish Molding Replacement - Lower Pillar|Page 22077 > < Garnish Molding Replacement - Lower Pillar|Page 22075