LaCrosse V6-3.6L VIN 7 (2006)
Trim Panel: Removal and Replacement
Floor Trim Plate Replacement - Rear
Floor Trim Plate Replacement - Rear
Removal Procedure
1. Open the rear compartment.
2. Remove the rear compartment sill plate.
3. Lift up on the center of the floor trim plate and remove either edge from the side panel.
4. Remove the floor trim plate from the rear compartment.
Installation Procedure
1. Position the floor trim plate into the rear compartment.
2. Engage the sides of the floor trim plate, pressing the sides into place.