LaCrosse V6-3.6L VIN 7 (2006)
Blower Motor: Service and Repair
BLOWER MOTOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the right side instrument panel insulator.
2. Disconnect the blower motor electrical connector.
3. Remove the blower motor mounting screws.
4. Remove the blower motor.
INSTALLATION PROCEDURE
1. Install the blower motor.
2. Install the blower motor screws.
Tighten the screws to 1.5 N.m (13 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.