LaCrosse V6-3.6L VIN 7 (2006)
17. Remove the I/P carrier.
18. Remove the nut (1) that secures the evaporator tube to the thermostatic expansion valve (TXV).
19. Disconnect the evaporator tube from the TXV.
20. Remove the seal washers and discard.
21. Use J 38185 in order to position aside the inlet heater hose clamp at the heater core.
22. Use J 38185 in order to position aside the outlet heater hose clamp at the heater core.
23. Disconnect the inlet heater hose from the heater core.
24. Disconnect the outlet heater hose from the heater core.
25. Disconnect the electrical connectors from the HVAC module assembly.
