LaCrosse V6-3.6L VIN 7 (2006)
Evaporative Emissions Hose: Service and Repair
EVAPORATIVE EMISSION (EVAP) HOSES/PIPES REPLACEMENT - CHASSIS/CANISTER
REMOVAL PROCEDURE
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the evaporative emission (EVAP) purge pipe connector at the fuel filter area.
3. Disconnect the EVAP purge pipe (8) from the EVAP canister (1).
4. Remove the EVAP purge pipe (8).
INSTALLATION PROCEDURE
1. Connect the EVAP purge pipe (8) to the EVAP canister.