LaCrosse V6-3.6L VIN 7 (2006)
15. Install the CPA to the seat belt pretensioner connector (1).
16. Connect the left roof rail module wiring harness yellow connector (2) to the left roof rail module (3).
17. Install the CPA to the left roof rail module connector (2).
18. Install the left rear panel.
19. Install the SIR Fuse.
20. Close the underhood fuse center cover.
21. Use caution while reaching in and turn the ignition switch to the ON position.The AIR BAG indicator will flash then turn OFF.
22. Perform the Diagnostic System Check - Vehicle if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System
Check - Vehicle. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and
Associated Procedures