LaCrosse V6-3.6L VIN 7 (2006)
2. Connect the forward lamp wiring harness connector to the junction block.
3. Connect the I/P wiring harness connector to the junction block.
4. Connect the engine wiring harness connector to the junction block.
5. Tighten the bolts retaining the engine, I/P and forward lamp wiring harness connectors to the junction block.
Tighten the wiring harness connectors to underhood accessory wiring junction block retaining bolts to 7 N.m (62 lb in).
6. Connect the I/P wiring harness individual connectors to the junction block.
7. Position the wiring harnesses and the accessory wiring junction block to the junction block retainer, align the 4 retaining tabs and press into place
to secure the junction block.
8. Secure the coolant recovery tank hose retainer to the junction block.