LaCrosse V6-3.6L VIN 7 (2006)
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the upper intermediate shaft pinch bolt.
^
Tighten the bolt to 48 Nm (35 ft. lbs.).
4. Install the intermediate shaft seal bolts.
^
Tighten the intermediate shaft seal bolts to 3 Nm (27 inch lbs.).
5. Connect the intermediate shaft seal to the steering column.
6. Important: Rotate the lower seal in order to obtain proper shaft to seal clearance.
Connect the lower intermediate shaft seal to the steering gear.