LaCrosse V6-3.6L VIN 7 (2006)
9. Notice: Refer to Fastener Notice in Service Precautions.
Crimp the eared clamp (1) using the J 35910, a breaker bar, and a torque wrench.
^
Tighten the eared clamp to 136 Nm (100 ft. lbs.).
10. Check the gap dimension, continue tightening until the gap dimension is reached.
11. Put a light coat of grease from the service kit on the ball grooves of the inner race and the outer race.
12. Hold the inner race 90° to centerline of cage with the lands of the inner race (1) aligned with the windows of the cage (2) and insert the inner race
into the cage.
