LaCrosse V6-3.6L VIN 7 (2006)
1. Position the wiper motor crank arm onto the wiper motor.
2. Measure the gap between wiper motor crank arm and the bracket tab. If the gap is not 4-8 mm (0.157-0.314 in), remove the wiper motor crank arm
and repeat installation.
3. Install the wiper motor crank arm screw.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screw to 16 N.m (12 lb ft).
4. Install the wiper motor crank arm cover.