buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Front Door Exterior Handle|Service and Repair > < Cowl Moulding / Trim|Service and Repair
Page 1
background image

Front Door Exterior Handle: Adjustments

Front Side Door Outside Handle Rod Adjustment

Removal Procedure

Important:  The outside handles have adjustable outside handle lock rods. This allows for adjustment of the amount of travel needed in
order to operate the outside handle.

When servicing a vehicle with adjustable outside handle lock rods, remove all free play between the outside handle and the lock. Also, do
not operate the outside handle before these connections are made.

1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement   (See: Front Door Panel/Service and Repair).
2. Remove the front water deflector, as necessary. Refer to Front Side Door Water Deflector Replacement   (See: Front Door Panel/Service and

Repair).

3. Raise the window to the full up position.
4. Apply masking tape around the outside door handle.

5. Open the outside door handle rod to lock clip located on the door lock.

The outside door handle rod should be loose from the lock.

6. Adjust the rod as needed.
7. Close the clip cover over the outside handle rod.

Installation Procedure

1. Inspect the door for proper operation.
2. Install the front door water deflector as needed. Refer to Front Side Door Water Deflector Replacement   (See: Front Door Panel/Service and

Repair).

3. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement   (See: Front Door Panel/Service and Repair).

Front Door Exterior Handle|Service and Repair > < Cowl Moulding / Trim|Service and Repair