LaCrosse V6-3.8L (2009)
*
Rear Brake Hose Replacement (See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Rear Brake
Hose Replacement)
*
Front Brake Caliper Overhaul (See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Overhaul/Front
Brake Caliper Overhaul)or Front Brake Caliper Replacement (See: Brakes and Traction Control/Disc Brake System/Brake
Caliper/Service and Repair/Removal and Replacement/Front Brake Caliper Replacement)
*
Rear Brake Caliper Overhaul (See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Overhaul/Rear
Brake Caliper Overhaul)or Rear Brake Caliper Replacement (See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service
and Repair/Removal and Replacement/Rear Brake Caliper Replacement)
*
Brake Pressure Modulator Valve Replacement (See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Hydraulic
Control Assembly - Antilock Brakes/Service and Repair/Brake Pressure Modulator Valve Replacement)
4. If the brake fluid was NOT contaminated with an oil-based or a silicone-based substance, but WAS contaminated with water or dirt, rust,
corrosion, and/or brake dust, replace the brake master cylinder reservoir cap diaphragm. The diaphragm may have allowed the moisture or
particles to enter the hydraulic system.
5. Fill the brake master cylinder reservoir to the maximum-fill level with Delco Supreme 11(R), GM P/N 12377967 (Canada P/N 992667) or
equivalent, DOT-3 brake fluid from a clean, sealed brake fluid container.
6. Pressure bleed the hydraulic brake system. Begin the procedure with the pressure bleeder reservoir filled to the maximum-fill level with the correct
brake fluid as indicated. Refer to Hydraulic Brake System Bleeding (Pressure) (See: )Hydraulic Brake System Bleeding (Manual) (See: ).
