LaCrosse V6-3.8L (2009)
1. If removed, install the clamps to the air cleaner intake duct.
2. Install the MAF/IAT sensor to the air cleaner intake duct.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the air cleaner intake duct to the throttle body and the air cleaner cover.
Tighten the duct clamps to 3 Nm (27 lb in).
4. Connect the PCV tube.
5. Connect the MAF/IAT sensor electrical connector (2).
6. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Injector/Service and Repair/Removal and Replacement/Fuel Injector Sight Shield Replacement).
