LaCrosse V6-3.8L (2009)
Fuse Block: Service and Repair
Instrument Panel Electrical Center or Junction Block Replacement
Instrument Panel Electrical Center or Junction Block Replacement
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (L26) (See: Starting and
Charging/Battery/Battery Cable/Service and Repair)Battery Negative Cable Disconnection and Connection (LS4) (See: Starting and
Charging/Battery/Battery Cable/Service and Repair).
2. Remove the outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair).
3. Disconnect the body wiring harness from the accessory wiring junction block. Pull the harness away from the block for access.
4. Remove the instrument panel (I/P) compartment. Refer to Instrument Panel Compartment Replacement (See: Body and Frame/Interior Moulding
/ Trim/Glove Compartment/Service and Repair).
5. Remove the junction block bolt.