LaCrosse V6-3.8L (2009)
Control Module HVAC: Service and Repair
HVAC - Automatic
HVAC Control Module Replacement
Removal Procedure
1. Remove the instrument panel lower trim plate. Refer to Instrument Panel Lower Trim Plate Replacement (See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair).
2. Remove the HVAC control module mounting screws (1).
Note: Retaining clips hold the HVAC control module in place.
3. Pull the HVAC control module rearward from the instrument panel.
4. Disconnect the electrical connectors form the HVAC control module.
