LaCrosse V6-3.8L (2009)
2. Install the following onto the steering shaft:
1. The steering wheel position sensor (1) Refer to Steering Wheel Position Sensor Centering (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Wheel Position Sensor Centering).
2. The sensor locator (2)
3. The sensor retainer (3)
4. The steering shaft seal (4)
5. The boot seal (5)
3. Install the steering column into the vehicle. Refer to Steering Column Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Replacement).
4. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair).
