LaCrosse V6-3.8L (2009)
8. Use your hands to lift the rear bumper approximately 38 mm (1.59 in).
9. Remove your hands and allow the vehicle to lower.
10. Use your hands to jounce the rear of the vehicle downward approximately 38 mm (1.59 in).
11. The dimension (R) for the left and right side of the vehicle is measured from the bottom lip of the wheel opening to the ground measured at the
center line of the rear wheel.
12. Compare the measurement to the specification table. Refer to Trim Height Specifications (See: Suspension/Specifications/Trim Height
Specifications).
13. If the measurement is outside of the specified range, replace the rear springs. Refer to Strut, Strut Component, or Spring Replacement (See:
Suspension/Suspension Spring ( Coil / Leaf )/Service and Repair/Rear Suspension Coil Spring).
