LaCrosse V6-3.8L (2009)
Warning: Refer to Glass and Sheet Metal Handling Warning (See: Body and Frame/Service Precautions/Technician Safety
Information/Glass and Sheet Metal Handling Warning)
Note: Keep the cutting edge of the tool against the window.
10. This will allow the urethane adhesive to be separated from the window.
*
Leave a base of urethane on the pinchweld flange.
*
The only suitable lubrication is clear water.
*
Use J 24402-A , J 39032 or equivalent in order to remove the window.
11. Remove the bottom of the windshield from the urethane adhesive using a long utility knife or similar tool. Keep the cutting edge of the utility knife
against the glass. Do this from inside the vehicle.
12. Remove the windshield (1) from the vehicle with the aid of an assistant (2).
Installation Procedure
1. Install the windshield into the opening. Refer to Adhesive Installation of Stationary Windows (See: Windows/Service and Repair/Adhesive
Installation of Stationary Windows).
2. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement (See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair).
3. Install the windshield wipers arms and blades. Refer to Windshield Wiper Arm Replacement (See: Wiper and Washer Systems/Wiper
Arm/Service and Repair).
4. Install the windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair).
5. Install the rearview mirror. Refer to Inside Rearview Mirror Replacement (See: Body and Frame/Mirrors/Service and Repair/Inside Rearview
Mirror Replacement).
