LaCrosse V6-3.8L VIN 2 (2005)
1. Install the yaw rate sensor/lateral accelerometer (1).
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the 2 yaw rate sensor/lateral accelerometer nuts (2).
Tighten the yaw rate sensor/lateral accelerometer mounting nuts to 25 Nm (18 ft. lbs.).
3. Connect the yaw rate sensor/lateral accelerometer electrical connector (2) to the yaw rate sensor/lateral accelerometer (1).
4. Install the front floor center console.
5. Perform the ABS Diagnostic System Check. Refer to Diagnostic System Check - Vehicle.
