LaCrosse V6-3.8L VIN 2 (2005)
1. Install the ignition coils (2) to the ICM (3).
2. Install the ignition coil screws (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 4.5 N.m (40 lb in).
3. Install the ICM (1) to the bracket.
4. Install the ICM nuts (2).
Tighten the nuts to 10 N.m (89 lb in).
5. Connect the spark plug wires to the ignition coils.
6. Install the 14-way electrical connector to the ICM.
Tighten the screw to 2.1 N.m (19 lb in).
7. Connect the negative battery cable.
