buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Radio Antenna Cable Extension Cable Replacement|Page 15277 > < Radio Antenna Cable Extension Cable Replacement|Page 15275
Page 2
background image

1. Install the new antenna cable to the retainers on the receiver bracket.
2. Connect the antenna cable to the digital radio receiver.
3. Route the antenna cable through the rear seat back pass through into the passenger compartment. Wrap the cable and harness with tape at the pass

through to avoid abrasion and rattles.

4. Secure the antenna cable to the wire harness in the rear compartment.
5. Install the rear compartment trim panel.

6. Connect the antenna cable (3) to the antenna base cable connector.
7. Secure the antenna cable to the wire harness.
8. Install the headliner. Refer to Headlining Trim Panel Replacement (See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair).
9. Install the rear window shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement (See: Body and Frame/Interior Moulding /

Trim/Trim Panel/Service and Repair).

Radio Antenna Cable Extension Cable Replacement|Page 15277 > < Radio Antenna Cable Extension Cable Replacement|Page 15275