LaCrosse V8-5.3L (2008)
8. Reach inside of the rear seat back cover in order to unfasten the hook and loop retainers that secure the cover to the pad.
9. Remove the folding armrest, if equipped. Refer to Rear Seat Armrest Replacement (See: Service and Repair/Rear Seat Armrest Replacement).
10. Remove the cover from the rear seat back by pulling the cover up and over the pad.
Installation Procedure
1. Install the cover to the rear seat back by pulling the cover down and over the pad.
2. Reach inside of the right rear seat back cover and reposition the release pullstrap through the cover.
3. Align the hook and the loop retainers.
4. Use firm hand pressure in order to fasten the hook and the loop retainers, securing the rear seat back cover to the pad.
5. Install the folding armrest, if equipped. Refer to Rear Seat Armrest Replacement (See: Service and Repair/Rear Seat Armrest Replacement).
6. Reposition the cable on the seat back.
7. Reposition the seat trim flaps.
8. Install new staples to the seat trim flaps.