LaCrosse V8-5.3L (2008)
1. Install the MAF/IAT sensor seal, if necessary.
2. Install the MAF/IAT sensor to the air cleaner housing.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the MAF/IAT sensor bolts.
Tighten the bolts to 10 N.m (89 lb in).
4. Connect the MAF/IAT sensor electrical connector (2).
5. Install the air intake duct. Refer to Air Cleaner Resonator Outlet Duct Replacement (See: Air Cleaner Housing/Air Cleaner Fresh Air
Duct/Hose/Service and Repair).