LaCrosse V8-5.3L (2008)
1. Seat the bottom junction block tabs and snap the top of the junction block to the passenger knee bolster.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the junction block bolt.
Tighten the junction block bolt to 10 N.m (89 lb in).
3. Connect the body wiring harnesses to the junction block.
Tighten the connector bolt to 2.5 N.m (22 lb in).
4. Install the I/P compartment. Refer to Instrument Panel Compartment Replacement (See: Body and Frame/Interior Moulding / Trim/Glove
Compartment/Service and Repair).
5. Install the outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair).
6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (L26) (See: Battery/Battery Cable/Service and
Repair)Battery Negative Cable Disconnection and Connection (LY7) (See: Battery/Battery Cable/Service and Repair)Battery Negative Cable
Disconnection and Connection (LS4) (See: Battery/Battery Cable/Service and Repair).
