LaCrosse V8-5.3L (2008)
Wiring Harness: Service and Repair
Wiring Harness Replacement
Removal Procedure
1. Remove the case side cover. Refer to Control Valve Body Cover Replacement (See: Valve Body/Service and Repair/Control Valve Body Cover
Replacement).
2. Use a small flat-bladed tool in order to remove the wiring harness from the solenoid valve (315A, 315B, 322, 334 and/or 440), TFP manual valve
position switch (395) and the temperature sensor (391).
3. Remove the wiring harness (224).
Installation Procedure
1. Install the wiring harness (224).