LaCrosse FWD V6-3.0L (2010)
9. Using terminal release tool EL-38125-556, press the prongs into the holes on each side of the terminal to be removed to release the lock tabs and
pull the terminal out of the connector body.
Terminated Lead Repair
1. Remove the terminal.
2. Find the appropriate terminated lead.
3. Use the appropriate splice sleeves depending on the gauge size.
4. Refer to Splicing Copper Wire Using Splice Sleeves (See: Testing and Inspection/Component Tests and General Diagnostics/Wiring
Repairs/Splicing Copper Wire Using Splice Sleeves).