LaCrosse FWD V6-3.0L (2010)
Note: Do not reuse the power vacuum brake booster pushrod retainer.
7. Remove the brake pedal assembly nuts (1).
8. Remove the brake pedal assembly.
Installation Procedure
1. Install the brake pedal assembly.
2. Install the brake pedal assembly nuts (1) and tighten to 22 Nm (16 lb ft).
3. Install the power vacuum brake booster. Refer to Power Vacuum Brake Booster Replacement (See: Power Brake Assist/Vacuum Brake
Booster/Service and Repair).