LaCrosse FWD V6-3.0L (2010)
5. Remove the brake caliper bracket (1).
Installation Procedure
1. Install the brake caliper bracket (1).
2. Prepare the brake caliper bracket bolts and the bracket threaded holes for assembly:
*
Thoroughly clean the residue from the bolt threads with denatured alcohol or equivalent and allow to dry.
*
Thoroughly clean the residue from the threaded holes with denatured alcohol or equivalent and allow to dry.
*
Apply threadlocker to 2/3 of the threaded length of the caliper bracket bolts. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Disc
Brake System/Specifications/Fluid Type Specifications),
*
Ensure there are no gaps in the threadlocker along the length of the filled area of the bolts.
*
Allow the threadlocker to cure approximately 10 minutes before installation.
