LaCrosse FWD V6-3.0L (2010)
Camshaft: Service and Repair
Camshaft Position Actuator Replacement - Bank 1 (Right Side) Exhaust
Camshaft Position Actuator Replacement - Bank 1 (Right Side) Exhaust
Removal Procedure
1. Remove the right hand secondary camshaft intermediate drive chain. Refer to Secondary Camshaft Intermediate Drive Chain Replacement - Right
Side (See: Timing Components/Timing Chain/Service and Repair/Secondary Camshaft Intermediate Drive Chain Replacement - Right Side).
2. Use an open end wrench on the hex cast into the camshaft in order to prevent engine rotation when loosening the camshaft position actuator bolt.
3. Remove the right exhaust camshaft position actuator bolt (1).
4. Remove the right exhaust camshaft position actuator (2).
5. Remove the camshaft thrust washer (3), if applicable.
Installation Procedure
1. Install the exhaust camshaft position actuator. Refer to Camshaft Position Actuator Installation - Right Side Exhaust (See: Service and
Repair/Overhaul/107. Camshaft Position Actuator Installation - Right Side Exhaust).
2. Install the right side secondary camshaft intermediate drive chain. Refer to Secondary Camshaft Intermediate Drive Chain Replacement - Right
Side (See: Timing Components/Timing Chain/Service and Repair/Secondary Camshaft Intermediate Drive Chain Replacement - Right Side).