buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Antilock Brake Automated Bleed Procedure|Page 1230 > < Antilock Brake Automated Bleed Procedure|Page 1228
Page 2
background image

1. Inspect the brake system for external leaks. Refer to Brake System External Leak Inspection   (See: Brakes and Traction Control/Hydraulic

System/Testing and Inspection/Component Tests and General Diagnostics/Brake System External Leak Inspection).

2. Pressure bleed the hydraulic brake system in order to purge any air that may still be trapped in the system.

22. Turn the ignition key ON, with the engine OFF. Check to see if the brake system warning lamp remains illuminated.

Note:  DO NOT allow the vehicle to be driven until it is diagnosed and repaired.

23. If the brake system warning lamp remains illuminated, refer to Diagnostic Starting Point - Vehicle   (See: Testing and Inspection/Initial Inspection

and Diagnostic Overview/Diagnostic Starting Point - Vehicle).

Antilock Brake Automated Bleed Procedure|Page 1230 > < Antilock Brake Automated Bleed Procedure|Page 1228