LaCrosse FWD V6-3.0L (2010)
Note
Select J 2534 MDI and Reprogram ECU from the Select Diagnostic Tool and Programming Process screen.
2. Select J2534 MDI and Reprogram ECU from the Select Diagnostic Tool and Programming Process screen.
3. Select KECM Keyless Entry Control Module - Programming from the Supported Controllers screen.
4. Follow the on-screen instructions.
3. Use MDI and GDS to clear all DTCs if required.
Claim Information
1. Submit a claim using the table below.
2. Courtesy Transportation - For dealers using WINS, submit using normal labor code; for dealers using GWM - submit as Net Item under the repair
labor code.
Disclaimer
