LaCrosse FWD V6-3.0L (2010)
7. Remove the control valve body cover bolts (1).
8. Support the transmission with a transmission jack.
9. Using the transmission jack raise the transmission to gain clearance for removal of the control valve body cover.
10. Remove the control valve body cover.
11. Remove the control valve body cover gasket.
Caution: Support the control solenoid valve assembly around the connector when removing the seal. Excessive pulling force can damage the
internal electrical connections.
12. Remove the control valve body cover wiring connector hole seal.
13. Remove all traces of the old gasket material. Clean the transmission case and control valve body cover gasket surfaces.
Installation Procedure
1. Install the control valve body cover wiring connector hole seal (4).
2. Install the control valve body cover gasket (3) to the control valve body cover.