LaCrosse FWD V6-3.0L (2010)
Shift Solenoid: Diagnostic Aids
FCI Connectors (SIR)
FCI Connectors (SIR)
Removal Procedure
Note: The orange CPA must be released first to disconnect or to connect the connector.
1. Lift the orange CPA vertically (avoid lifting on an angle to the connector) approximately 4 mm to release the connector. Use a small flat-bladed
tool to help release the orange CPA. The orange CPA can also be released manually without any tools.
2. Grab the connector on both sides and lift the connector vertically to disconnect the connector.
Installation Procedure