LeSabre V6-181 3.0L (1986)
3.
Wheel compound sanded panel with 3M Finesse--It II, Part Number 05928, polishing compound and 3M Super Buff Polishing Pad, Part Number
05705, or equivalent. NOTICE: Half way thru buffing operation, while panel is still wet, with 05928, stop and clean polishing pad with a spur,
then finish polishing with light pressure.
a.
To remove any swirl marks left in the clearcoat during wheel compounding operation:
-
If color is of a lighter color shade, generally using 3M Imperial Hand Blaze 05990 is all that is required.
-
If color is of a dark shade, usage of a nondirectional dual action (D.A.) orbital sander motor may be desired to remove any indication of
swirls. In addition to the sander, a different pad is required which can be obtained from:
Ferro Industries Mt. Clemens, MI 48045 (313) 792-6001 and a different bonnet, Model 606 from:
Ace Wiping Co. Detroit, MI 48210 (313) 834-4000
Use 3M Finesse-It II for this finish operation.
NOTICE:
Buffing wheels are not recommended for routine New Car Pre-delivery preparation of basecoat/clearcoat finishes.
