buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Body and Frame|Seats > < Luggage Rack - Interference With High Mount Brake Lamp
Page 1
background image

Sunroof / Moonroof Cable: Technical Service Bulletins
Power Sunroof - Cable Availability

Bulletin 87-10-32 Date Dec., '87

Ref. No. 87-190-10

Corp. Ref. No. 701503
SUBJECT:

POWER SUNROOF

MODELS AFFECTED:

1985-86 AND 1987 ELECTRAS/PARK AVENUES PRIOR TO 1987 VIN 418700 1985-87 RIVIERAS PRIOR TO 1987
VIN 400894

If replacement of a sunroof sliding and vent cable should be needed, a new service cable is available (Part Numbers 16602930, right hand; and
16602931, left hand). When these cables are used, the rear carrier bumper stops must be moved rearward 6 mm (attached illustration) so the vertical
adjustment screws can be accessed. When only one cable is being replaced, carefully inspect the other cable for worn or cracked areas. Bumper carrier
stops are reworked with sunroof housing out of vehicle and cable conduits and track removed.

Carrier

1.

Remove carrier bumper stops (see illustration).

2.

Locate and mark new mounting holes 6 mm rearward of original holes on track assembly.

3.

Drill a 4.3 mm hole at mark and thread with a 5 mm x .8 tap.

4.

Install carrier bumper stops.

WARRANTY INFORMATION

Labor Operation Number:

T5162

Labor Time:

0.4 Hour, Both Sides

Trouble Code:

92

Body and Frame|Seats > < Luggage Rack - Interference With High Mount Brake Lamp