LeSabre V6-181 3.0L (1986)
Hydraulic Assembly: Service and Repair
Mounting Bracket Replacement
Fig. 1 Exploded View of Hydraulic Unit
Refer to Figure 1 and follow these steps:
1.
Remove the hydraulic unit.
2.
Remove the four mounting bracket-to-cowl nuts, using a 15 mm socket and driver.
3.
Remove the mounting bracket from the cowl, along with its dust boot.
4.
Install the replacement mounting bracket and dust boot, tightening the bracket-to-cowl nuts to 20 N-m (15 lb. ft.) torque.
5.
Install the hydraulic unit (see above procedure).