LeSabre V6-231 3.8L VIN 3 SFI (1988)
BULLETIN COVERS:
The new 1-2 and reverse band assemblies do not require selective band apply pins. A new manufacturing process machines the area where the case
anchor pins contact the band. With this new process, all the 1-2 bands are the same size and all the reverse bands are the same size. With the bands all
the same size, selective band apply pins are not required.
SERVICE PROCEDURE:
When replacing a 1984 through 1991 model year transaxle 1-2 or reverse band, it is not necessary to measure the selective band apply pin(s), provided
the band service package contains an instruction sheet about the non-selective band apply pin.
IMPORTANT:
If ordering a new 1-2 or reverse band, the correct band apply pin must be used with the band. The correct band apply pin is not included with the new