LeSabre V6-231 3.8L VIN 3 SFI (1988)
-
Vacuum leaks (low vacuum supply to the vacuum modulator). Required vacuum is 44-61 kPa (13-18 in. Hg.)
-
Paint in the modulator tube restricting vacuum to the modulator causing a delayed response to throttle movement.
-
Sticking modulator valve.
-
Sticking 1-2 servo valve.
-
Missing checkball (#2, #4 or #12).
SERVICE ACTION
Remove the control valve assembly from the transaxle and disassemble the 3-2 control valve train. Install the 3-2 control valve spring (341) from the
appropriate service package shown in the Service Parts Information section.
FIGURE 1 - THM 440-T4 TRANSAXLE IDENTIFICATION INFORMATION
SERVICE PARTS INFORMATION
Transaxle Model
3-2 Control Valve
Identification
Spring Package
(Figure 1)
Number
Contents
8FCH
8646979
(1) 3-2 Control Valve Spring
(2)
Spacer Plate Gaskets
(1)
Instruction Sheet
8BKH, 8FBH
8646982
(1) 3-2 Control Valve Spring
(2)
Spacer Plate Gaskets
(1)
Instruction Sheet
8BJH, 8BRH
8646993
(1) 3-2 Control Valve Spring
8BTH, 8BYH
(2) Spacer Plate Gaskets
8FJH
(1) Instruction Sheet
Parts are currently available from GMSPO.
SERVICE MANUAL REFERENCE
Refer to the appropriate 1988 Service Information Manual, Section 7A1 Automatic Transaxle On Car Service and THM 440-T4 (ME9) Automatic
Transaxle Unit Repair Table Of Contents for control valve assembly service information.