LeSabre V6-231 3.8L VIN 3 SFI (1988)
Power Window Motor: Service and Repair
Power Window Motor
WINDOW MOTOR
REMOVE OR DISCONNECT
1. Door trim panel
2. Water deflector
3. Window regulator and motor.
4. Motor from regulator using a 4.8 mm (3/16") drill bit, and drill out rivets holding motor to regulator.
INSTALL OR CONNECT
1. Motor to regulator using (3/16") rivets.
2. Window regulator and motor to door.
3. Water deflector.
4. Door trim panel.
