LeSabre V6-231 3.8L VIN A 2-bbl (1984)
Rear Bumper Bracket: All Technical Service Bulletins
Technical Procedure
FIGURE 1 - BUMPER ATTACHMENT WITH FULL REINFORCEMENT (LESABRE - ELECTRA FRONT BUMPER SHOWN - OTHER MODELS SIMILAR)
TECHNICAL PROCEDURE
If there is a question as to a vehicle being involved in this campaign, inspect the front bumper attachment on Electras, LeSabres, and Rivieras, and the
rear bumper attachment on LeSabres. If the bumper has a full width reinforcement, as shown in Figure 1, it is not involved.
FIGURE 3 - MODIFIED BUMPER BRACKETS WITH REINFORCEMENTS - LEFT SIDE BRACKETS SHOWN
PART A
REPLACEMENT OF BUMPER BRACKETS
Refer to Parts Information Section or Figure 3 to obtain correct right and left brackets.