LeSabre V6-231 3.8L VIN A 2-bbl (1984)
If an existing R-12 service port is not used, it must be rendered inoperative. Place several drops of a thread locking compound, such as Loctite(R)
243, in the valve core, and onto the cap threads. Secure the cap and let it set for 15 minutes.
4.
Install Any Additional Parts Needed
See "Platform Details" after Step 6. If a vehicle is listed as a "Basic Retrofit", no additional parts are required (except for compressors, see the
Compressor Replacement Chart at the beginning of Platform Details). If no parts are required, PROCEED TO STEP 5.